金沙检测线路js69(China)官网 - 搜狗百科

Today, many factory automation components are used to create parts and then assemble a variety of consumer products from food to electronics. Workers in the hands of the process of supervision and to ensure that the assembly line to maintain a long flow of time, the maximum in the shortest possible time to produce thousands of quality products. Multi-use machines require careful calibration and adjustment without the need for any other person's interaction. Medical research facilities Food processing plants are usually used in automated assembly processes in areas where humans are exposed to hazardous areas or which may cause contamination. Robot manipulation or robotic assembly equipment is used to handle the product system in a sealed environment to reduce this risk. Technical staff in the glass barrier, keep the product safe and human contact, but allow the quality management process.

1. Operating procedures:

A. After the machine is connected to the power source and the air source, clean the other debris on the clean bench before starting the machine. To avoid "card" machine, damage to equipment.

B. the gasket, semi-finished products were placed in the respective oscillation disk,

C. enter the manual operation screen, check the action situation and start the next point to confirm.

D. Enter the "automatic" button on the main screen to start production.

2. Environmental safety precautions:

A. When the machine is running, the operator's limbs are prohibited from reaching the operating range of the parts to prevent mechanical damage.

B. Machine operation abnormalities and processing, should be "first stop, post-processing" law to deal with.

3. Maintenance matters:

A. Sports parts need to add once a week lubricants, often in time to exclude the water in the filter.

B. The equipment must be sealed with a protective film when placed in the idle area.